Tag: Spanning Tree

EXOS – MSTP

10th January 2016 by Martin Flammia

Filed under Extreme Networks Configuration, Extreme Networks EXOS

Last modified 26th April 2016

Below is a configuration example between an EOS and EXOS switch. Update: This post has been re-edited and configuration confirm in lab EXOS Version 12.0 and later (IEEE 802.1D-2004) Bridge priority ranges from 0 to 61,440 in multiples of 4,096. Default bridge priority is 32,768. The bridge with the lowest bridge ID becomes the MSTI regional root bridge. Port priority 0 to 240, in multiples …

EXOS – DefaultFilter / Debuging

30th December 2015 by Martin Flammia

Filed under Extreme Networks EXOS

Last modified 4th January 2016

The best way to debug is with the use of the filter, please refer the logging section for more detail on how to set this up. To get started the ‘DefaultFilter’ has a bunch of events that are enabled by default, these are identified as a ‘Y’ under the column ‘In’, and can be listed with the following command:

If you want to know exactly what all …