Tag: Force-Unauth

EOS – Authentication Behaviour

14th January 2016 by Martin Flammia

Filed under Extreme Networks EOS

Last modified 18th January 2016

All the command line referenced for configuring 802.1x can be programmed through Netsight Policy Manager, and is the recommended way to do this. For reference the authentication behaviours and their equivalent command line is detailed below: Authentication Behaviour                                     Active Unauthenticated Behaviour                                  Default Role <none> Disable 802.1x Authentication for the port           Checked

Authentication Behaviour        …

EOS – Multi-User

14th January 2016 by Martin Flammia

Filed under Extreme Networks EOS

Last modified 18th January 2016

Mulit-User configures the authentication mode to 802.1x only (strict) or multiple mode (multi).  Each method can have its own policy. Up to seven authentication methods per user on the same port, but only one method per user is applied, authentication precedence is used to determine authentication method if multiple are used. Multiple users can be configured to authenticate on an single port. Authentication Modes: Quarantine …

EOS – MultiAuth

14th January 2016 by Martin Flammia

Filed under Extreme Networks EOS

Last modified 18th January 2016

The following modes can be configured to enable 802.1x authentication: auto — Auto authorization mode (default). The Enterasys Matrix system will only forward frames received on a port which are considered authenticated according to the state of the corresponding access entity. forced‐auth — Forced authorized mode, which effectively disables 802.1X authentication on the port, and allows all frames received on the port to be forwarded. …